Ericsson md 110 user manual

Internal automatic callback Conference facilities Individual abbreviated dialling Follow me Direct diversion Call holding General cancellation Previous Page. Next Page. Ericsson MD User Manual 5 pages. Operator terminal for ericsson mx-one telephony system and ericsson md pages.

System telephones for ericsson mx-one telephony system and ericsson md pages. System telephones for ericsson md and mx-one telephony system pages. Analog telephones for ericsson md and mx-one telephony switch 84 pages. System telephones for ericsson md and mx-one telephony switch pages.

System telephones for md communication system 98 pages. If "8" is used for access to the PBX for outbound calls and the basic configuration script is followed, then the "7" This is possible if the customer does not require that the MD extensions have the same ease of function.

Direct dialing by radios to MD extensions is accomplished with this entry. Page 72 The following three entries will provide for direct dialing to the other PBX extensions for numbers in the range.

The other PBX sends the radio number across the tie line. In this case, the radio must be programmed for DTMF pulse width and interdigit delay for the MD to correctly interpret the digits as specified in This allows for up to a maximum of 23 T1 or 30 E1 simultaneous interconnect calls to be handled by Jessica. If Loop Start trunks are used, then it is highly recommended that they be converted to Ground Start prior to cutover. These trunks allow callers to dial in directly to a station.

What is the assigned DID number range? The 2 additional channels are used for synchronization channel 0 , and a common signaling channel channel Number allocation within the MD can be described as specification of the leading digit or pre-digits to be used or reserved for a given function by the MD A minimum number of digits must be specified such that the pre-digits uniquely define the set of numbers or number series to be used for the intended function.

Page 84 LBIB 4. Indicate Area Codes. If so, which ones? Page 90 Ericsson Inc. Print page 1 Print document 90 pages. Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals?

Sign In OR. Don't have an account? Ericsson Business Networks AB. All rights reserved. This document contains proprietary information which is protected by copyright.

No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, or translated into another language, without prior written consent of Ericsson Business Networks AB , Stockholm, Sweden.

Ericsson makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Ericsson shall not be liable for errors contained herein nor for incidental or consequential damages in connection with the furnishing, performance or use of this material.

Preparing the console Incoming calls Service facilities Outgoing calls Other useful facilities Display unit codes Key description The OPI operator console uses a combination of advanced digital technology, ISDN communication principles and distributed stored program control. This makes it the perfect choice for an organisation that knows the value of fast and precise information handling.

The console consists of three components:. The symbols on the Display Unit are not permanently visible, only the symbols relevant to an individual call appear. Numerical information is provided in the call admittance, call status and connection fields. The initial section of the manual introduces the equipment and familiarises you with the layout of the console.

The main body of the manual covers all the operating functions e. Actions appear in an alternative bold typeface and the key diagram appears in the left hand margin opposite the text. For example:. The systems response is shown with explanatory text and, if relevant, the display codes. A Quick Reference Guide is incorporated into the back cover of this manual. The guide covers the key depressions for common operating actions and a list of call processing, special function and service key functions.

Note: How to install Option unit and headset, see installation instructions provided with the Option unit. Note: As an option, calls to the individual operator number can be received even if the console is turned off, if required contact system administrator.

Night appears on the bottom row of the display if the console is in night service mode. If an incoming call is not answered within a predetermined time, the console is automatically switched off. The console can be used in automatic or manual mode. In automatic mode, calls are answered immediately without the aid of a key depression.

ANS is shown on the display signalling that calls will be automatically answered. Incoming calls can be extended automatically or manually, automatically extended calls are transferred to extensions without the aid of a key depression.

XTD is shown on the display signalling that calls will be automatically extended. The operator functions in this manual are for a console switched to automatic extend. When an extension makes an incoming call through a tie line or from a private network the display shows EXT in place of TRK.

There are four reasons a call is recalled to the console, a code showing the reason appears on the centre row of the display:. When the extension replaces the handset you are automatically connected to the caller. If an operator dials the common operator number all the other operator consoles in the system ring. This type of call is signalled when:. An emergency call from an extension is signalled by a continuous acoustic signal.

When a called extension has activated an absence information and the call is diverted to your console. The absence information can be activated on consoles or extensions. OPR or. Note: If the console is set to automatic extending mode, the call is automatically extended after the last digit of the extension number is dialled and the console is cleared.

If you want to announce the call before extending the console must be in manuaal extending mode :. The call is extended and camped on to the busy extension. The console is cleared. When an extension is barred from receiving direct indialled calls from public network, it is rerouted to you.

If the called party is restricted to receive external calls at all you can pass on a message to the extension:. When an external party wishes to speak to an extension with an activated absence information. Note: The absence codes consist of one digit which depends on the system connected to the exchange.

Contact your system administrator regarding your available absence codes. When an internal extension is ordered to transfer calls to an external extension:. The display momentarily shows that the call is being redirected to another extension.

When you extend a call to an extension that has activated a personal number profile:.